NEW PRODUCT RELEASE: Eurojet Electronic Boost Gauges & Pods
Nov/090
Eurojet MK5 Electronic Boost Gauge Kit & Vent Pod - Intro Price = $169 + FREE shipping!
We previously announced that Eurojet’s new line of gauges and gauge pods were coming soon, slightly before Waterfest 15, back in July 2009, but without further adieu, 20squared is proud to announce the release of Eurojet’s brand new Electronic Boost Gauges and vehicle specific Gauge Pods. A full electronic gauge, gives you an opening and closing ceremony, while providing a buzz-free application. This gauge is guaranteed not to whistle, whine, buzz, or rattle. Eurojet designed a gauge that takes the mechanical boost signal from your engine, interpolates the signal inside an electronic junction box, and then sends the electronic signal to your boost gauge; successfully eliminating “buzz”, providing pinpoint accuracy, and allowing precise monitoring of your vehicle’s boost signal.
As if that wasn’t enough, Eurojet has pinpointed the infamous VW “Blue” instrument cluster illumination for a perfect matching solution.
In addition to a full replacement Vent Pod that matched the OEM factory fitment and finish, bringing you that OEM+ type look you’ve always wanted out of a gauge pod!
If you have any questions, concerns, or would like to place an order, please contact us via email (Sales@20squared.com) or phone at 610-757-4649!
Authorized Unitronic DSG Software Dealer
Oct/090
The wait is officially over. Finally, a fully developed DSG software program from our good friends at Unitronic! The ultimate DSG transmission software has arrived and best of all, 20squared is an authorized Unitronic DSG software dealer! Experience a smooth and unsurpassed gear shifting, lightning fast response with a highly evolved launch control system. Don’t even think about it twice, the power and sound will blow you away! Now Available for your VW/ AUDI DQ250 DSG Transmission.
For 2.0TFSI DQ250 DSG
Stage Details Rev Limiter Launch Control Price
Stage 1 Optimized D & Sport Mode 7100 RPM 3500 RPM $500.00
Stage 2 Optimized D & Sport Mode, Increased NM limit to 150NM 7150 RPM 4200 RPM $600.00
Stage 3 Optimized D & Sport Mode, Increased NM limit to 500NM 7200 RPM 4500 RPM $700.00
For 3.2L VR6 24v DQ250 DSG
Stage Details Rev Limiter Launch Control Price
Stage 1 Optimized D & Sport mode 7000 RPM 3400 RPM $500.00
Stage 2 Optimized D & Sport mode 7100 RPM 4200 RPM $600.00
Stage 3 Optimized D & Sport mode, increased NM limits to 600nm 7400 RPM 4700 RPM $700.00
For a limited time, if you are an existing Unitronic Customer, get your DSG Flash with an introductory discount of $200. This offer will be valid until the end of the year 2009. After the deadline (December 31st, 2009) you will only get 100$ off. These special only apply to existing Unitronic customers
PACKAGE PURCHASE
When packaging your ECU flash together with a DSG glash, get $200 in instant savings! Both files must be purchased and flashed onto the vehicle at the same time in order to qualify for the savings.
20squared performs all installation via the OBDII port of the vehicle. Flashes typically take approximately 30-45 minutes to complete and within no time you’ll be ripping down the street enjoying a new level of performance!
Unitronic DSG software is currently only available for cars equipped with DSG with TCU Temic DQ250 (2006-2008). Unitronic is currently working on support for 2009+ with TCU Temic DQ500. More info to come soon!
For more information CLICK HERE or to schedule an appointment, please visit www.20squared.com or give us a call at 610-757-4649.
Boom! Function…Meet Form!
Sep/090
Eurojet just release their new Catch Can System specific for the 2.0T FSI MK5 GTI, Jetta, and Audi A3. Unique in it’s design, the Eurojet Catch Tank is machined in the shape of an ammunition box and will be sure to add a nice touch to your engine bay. Already have the Eurojet 2.0T FSI Diverter Valve Relocation Kit, featuring Eurojet’s unique Grenade Diverter Valve? Add this catch can for a theme that’ll flow and impress the judges! Precision machined and crafted to perfection, Eurojet has created the most unique Catch Tank System to its arsenal of products. Protect your intake valves, extend the longevity of your motor, and increase the overall reliability and performance of your FSI with this system. Available in a Standard Machined Finish, Snow Camo, Green Camo, Red Camo, and a plethora of custom powdercoated finishes. At an Introductory Price of $269 + FREE SHIPPING, you can’t resist picking one up for your FSI today! We’ll gave the cans with us in a variety of flavors at H20 International next weekend (September 26 & 27, 2009).
20squared AIR: Trials, Tribulations, & Truth
Jun/092
With a couple of air ride kits under our belt now, and being more involved in the air community, I’ve noticed a number of things that I see mentioned pretty often, that I feel could use some clarification. It seems that everyone is after the “Ultimate Air Ride Kit” that is magically going to get you the absolute lowest possible. Well, I hate to break it to ya, but there’s no magic involved. Just alot of time and labor. Why so much time? As mentioned above, there is no set “Kit” that is going to work universally on each and every car. There are so many different styles people want to run in terms of a trunk setup, and a BUNCH of bag-over/strut setups out there that offering a “Kit” that will work with any and all applications nearly impossible. Sure, there are a number of other “companies” that sell self proclaimed “Kits”, but I almost guarrantee you that you’ll end up hitting up your local Fastenal dealer more than once in order to get your “Kit” routed and plumbed correctly.
We don’t offer “Kits”, because as mentioned above, the fittings, tank, and other components are dependant on what the customer wants. With that said, We can certainly put together a full setup for you, based on YOUR goals. Unless you are making the EXACT same trunk setup EACH and EVERY time for EVERY customer, there’s no way that you can have a standard “Kit” that will work for everyone. In addition, there are a number of things that we INCLUDE with a setup build by 20squared, that most other companies do not use in their “kits”. We feel that components such as running stainless steel leader lines, which is not something that you see very often in our little market here, is going to add to the long-term stability and overall quality of any air ride setup. After all, the last thing you want to do is bust a line right at the bag.
The other thing that we’ve noticed with the Show Season in full swing now, is a PROPER, CLEAN trunk setup seems to be over-rated. Sure most everything is hidden under a falsefloor, but people are going to want to see your setup and you’re better want to show that damn thing off. The last thing you want to do is lift up the falsefloor and it be a cluster of hoses, wires, etc. This plays a big part in the TYPE, SIZE, and BEND of the fittings used. In an attempt to make this come full circle, most of the “Kits” you see offered out there, come with all straight push-to-connect fittings that are made out of plastic and have a maze/twist/turned mess of lines in your trunk. How much cleaner does it look when you have nice nickel plated push-to-connect fittings using the right bends and sizes? Let me give you a hint. A LOT!
That’s what we’re about and, as many of you might know, our air ride builds might take a BIT longer than most, but everything that leaves our shop is proper and WON’T leave until so. So be flexible or else we’re going to be forced to shortcut things here and there. Air ride setups are something that need some good old fashioned TLC. Not just thrown together and installed in a day or over a weekend.
Special Thanks to Ducky 2.0T for letting us outfit his 2007 GTI with a complete Air Ride setup and install done the RIGHT way. The 20squared way! You can check out the pictures throughout this post, or for the full slew of pictures, check out his flickr: http://www.flickr.com/photos/ducky_xti/sets/72157620611850576/